Cinder Down Quilt (10°C & 2°C)
Highlights
BEST USE: Ultralight Adventures
PERFORMANCE: Warm Weather
WEIGHT: 16.9oz | 480g
COMPRESSED VOLUME: 2 liters
Shipping & Returns
We use climate-neutral shipping with DHL GoGreen.
For orders within Germany we charge a shipping fee of 6,95 €.
For international orders, shipping costs 9,95 €.
All orders are usually shipped within 24 hours on working days. Delivery time can take up to three working days Germany-wide and up to six working days internationally, and depends on the shipping service provider.
All orders can be returned within 14 days of purchase. However, for the sake of the environment, please make sure to keep returns as low as possible.
Find Locally
Unlike sleeping bags, which can be tested using a European Norm (EN) or ISO test protocol, there is no standard for temperature testing of quilts.
All quilt temperature ‘ratings’ are therefore estimates.
Sea to Summit calculates temperature recommendations for quilts based on the weight of down or synthetic-fill used, compared to a similar Sea to Summit sleeping bags. This information is presented using the following icon:
The Lowest Comfort Temperature is the lowest temperature at which we believe an average sleeper will still sleep comfortably. The Functional Limit is the lowest temperature at which a quilt could be used – it is below the threshold of what most users would regard as comfortable.
These recommendations assume a sleeping mat with a tested R-Value appropriate for expected ground temperatures – without this, the quilt itself is unlikely to keep the sleeper warm enough.
A variety of factors impact the warmth of a sleeper - the above temperatures are merely guidelines, not guarantees. It’s important to think of a quilt, an appropriately insulating sleeping pad and a liner as a sleep system. For example - if you plan on sleeping in nighttime air temperatures of 3°C, you should use a quilt with a Lowest Comfort Temperature of 4°C, plus a sleeping mat with an R-Value of 2 to 3 (or higher), and consider a Reactor thermal liner.
Description
The Cinder is a lightweight, super-packable quilt protected by a waterproof yet breathable shell. A drawcord pulls the foot end together into a foot box for cooler nights, and three adjustable straps keep the quilt secured to your sleeping mat.
Quilts are perfect for weight-conscious backpackers. The lack of a zipper and hood reduces weight and packed volume, and the broad cut provides freedom of movement. Sea to Summit quilts feature the QuiltLock system which allows quilts to connect to a Sea to Summit sleeping bag adding an extra season of warmth.
Tech specs
-
Best UseUltralight Backpacking
-
Comes WithWater-resistant Ultra-Sil Compression Sack and storage cell
-
InsulationUltra-Dry Down 750+ Loft
-
Shell FabricUltralight 20D Nylon Shell
| Regular 10°C | Regular 2°C | Long 10°C | Long 2°C |
|---|
TECHNICAL FEATURES
Nano Shell is a 20 Denier Nylon fabric with a water-shedding DWR finish on the exterior and a microporous PU coating on the interior. This highly breathable, highly water-resistant, windproof shell fabric is used on the Sea to Summit Alpine sleeping bags and Cinder quilts where it protects the down from external moisture even during very wet conditions.
The second highest-lofting down used in any of Sea to Summit’s sleeping bags. 750+ Fill Power indicates that one ounce (30g) of down will re-expand to over 750 cubic inches after compression. Higher loft means that less down can be used to achieve the same temperature rating – important for performance sleeping bags. The loft and down quality/composition are independently tested by the International Down and Feather Laboratory (IDFL) – a copy of the certification is supplied with every Sea to Summit sleeping bag. The down is responsibly sourced and RDS certified and treated with the environmentally-friendly Ultra-Dry Down treatment.
100% of the down used in our sleeping bags and quilts is independently certified to the Responsible Down Standard (RDS). The RDS certifies down against animal welfare requirements and tracks it from the source to the final product. The purchase of RDS certified products demonstrates demand for better animal welfare practices in the down and feather supply chain. Sea to Summit is certified to the RDS. To learn more about RDS visit https://textileexchange.org/standards/responsible-down/
Ultra-Dry Down is a non-PFC treatment hydrophobic treatment applied to the down during down processing. It is not a coating (which would reduce the ability of the down to loft), it comprises of very small particles of a polymer that cause the down clusters / feathers to repel water. Ultra-Dry Down is PFC and PFAS-free. Hydrophobic down is not waterproof; but it absorbs less water than untreated down and dries much more quickly.
Ultra-Dry Down does not affect the loft or lifespan of the down, or its breathability. The treatment will last through at least 20 washings.
The QuiltLock system uses the snap locks located at the shoulder and foot end of Sea to Summit sleeping bags plus the quilt footbox / quilt straps to secure a quilt to the sleeping bag. This adds thermal performance and versatility to your sleep system: your integrated quilt now works for ultralight summer adventures and turns your three-season bag into a four-season sleep system.
Design Details
Frequently Asked questions
Suitable for backpackers?
Possibly. Light weight, small packed volume and room to move are great plus points; some sleepers miss having a hood and occasionally experience drafts at the perimeter of the quilt.
EN Rated / suitable for colder weather?
No. The EN test does not apply to quilts (from any brand). The ‘lowest comfort temperature’ is based on comparable Sea to Summit sleeping bags – the Cinder is really a summer quilt.
Able to be coupled with another Sea to Summit Quilt?
Yes. Press-studs along the edge (usually used for the mat attachment straps) can be used to join any two Sea to Summit quilts together.
You have more questions?
Check out our FAQ page HERE and discover even more answers about our products.
